Please Wait...



€ 11.87 *
* Price (VAT included)

Colourless Adhesion Promoter

Universally usable for non-absorbent substrates

Glass, ceramics, metal & various plastics

Silane basis for MS-Hybrid and silicone-sealants

Add to cart

Colourless Adhesion Promoter on silane basis for MS-Hybrid and silicone-sealants.

Adhesion Promoter V2 is universally usable for non-absorbent substrates.

Adhesion Promoter V2 can be put on with a paintbrush in a thinner shift on the cleaned, fat-free and dry surface; or used as a wash-Adhesion Promoter (put on the Adhesion Promoter onto a tissue and then clean the surface) as primary treatment of the surface. The open-time is at +20°C at least 10 minutes. At the latest 2 hours after putting on the Adhesion Promoter the application of the sealant or adhesive is to be done (at long waiting times the surface must be controlled again for cleanness). May leave stains which are difficult to remove from the substrate. Do not wait until residues are dried up, remove immediately.

Glass, ceramics, metal, as well as various plastics.

Odour:             characteristically as solvent     
Viscosity:          low-viscous     
Appearance:      liquid, transparent     
Density:            0.808 +/- 0.02 g/ml     
Packaging:        100ml, 250ml, 500ml, 1000ml, 10 Liter    
Storage:           dry and cool     
Shelf life:          12 Months from production date in the unopened original packaging    
Lower working temperature:      +5°C     
Drying time at +20°C:     at least 10 minutes, max. 2 hours