Please Wait...

Shop

TURBO-FIX & GO 290ml WHITE

€ 17.30 *
* Price (VAT included)

4 in 1

VERY STRONG GLUE

Holds immediately 400gr directly on surface
AFTER HARDENING 300Kg

Inside water use

Not yellowing
Paintable

Not spoiling the silvering on mirrors
 
Eco friendly

Package: 24 pcs.

Add to cart

Fast curing, elastic 1-component adhesive and sealant based on a MS-hybrid-polymer, with accelerated initial adherence (high tack), moisture curing, neutral polymerisation, odourless. Free of solvents, silicones and isocyanates.

Adheres and supports immediately!

The bonded elements need no support after applying the adhesive.

The TURBO-FIX & GO is compatible with colors.

Bonding in sectors of construction and industry of steel, metal, aluminium, wood, laminate, cork, plastics, concrete, stone, plaster, ceramics and so on as for example wood panelling, baseboards, decorative panels, insulating and acoustic boards, decorative moulding, wall claddings, panels, doorsteps, insulation materials, polystyrene, tiles, natural stone, window seats and so on.

Also suitable for elastic bonding in sector of metal-, apparatus- and machineengineering, plastics- and electrical technology, ventilation engineering and air-conditioning, car bodywork, automotive, wagon, container and car manufacturing.

Turbo Fix&Go is suitable for any bonding where a high initial tack is required, where a danger of pollution by silicone exists or where painting over something afterwards is required.

In general, bonded elements do not need any support after the application of the adhesive. Adheres and sticks right away! Can be applied on moist surfaces.

 

Processing
The precondition for maximum adhesive strength is a clean, dry and fat-free substrate with a perfect structure. Turbo Fix&Go adheres to many substrates without Adhesion promoter. For optimal results we recommend the use of Adhesion promoter V2 on non absorbent substrates. On absorbent substrates we generally recommend the use of Adhesion promoter V21. Glued sheets can be spot-welded and laced with the most commercially available lacquers “wet in wet”. Turbo Fix&Go can be coated after the complete curing with powder coating and be loaded for a short while during the heating procedure with up to +200°C.
We recommend test glues on all applications.

Cleaning of the surface
The substrate must be stable, clean, dust-, oil- and fat-free. Good results can be achieved with rubbing alcohol.

Adhesion promoter
On many clean substrates a good adherence can be achieved without Adhesion promoter. However, it should always be tested, if the cured product is exposed to big fluctuations in temperature or has contact with water. In that case, and with absorbent or difficult substrates, we always recommend the application of Adhesion promoter V21 in advance. On non absorbent substrates we recommend the application of Adhesion promoter V2.

Tooling
We recommend tooling the joints with tooling solvent and eventually using help-tools for joints.

Work and environment safety
Important information on the work and environment security you can find in the safety data sheet.

Chemical resistance

  • good to water, aliphatic solvents, oils, greases, diluted inorganic acids and alkalis
  • moderate to esters, ketones and aromatics
  • not resistant to concentrated acids and chlorinated hydrocarbons
  • completely weather-resistant

Turbo Fix&Go is paintable.

Because of the diversity of varnishes and paints on the market, we recommend a preliminary test. Using paints based on alkyd resins the drying process may be hold up. The lacquer should be applied to the sealant within 4 hours. The best results can be achieved wet in wet.
After cleaning with acetone, joints can be varnished at any time.
Turbo Fix&Go is compatible with natural stone and can be used as mirror adhesive.

Shore-A-hardness (DIN 53505)             58
after 3 weeks of storage

Modulus elongation at 100%                 ≥ 1.3 N/mm2
DIN 53504 S2
Storage during 7 days

Elongation at break (DIN 53504 S2)      ≥ 300 %
Storage during 7 days

Tensile strength (DIN 53504 S2)            ≥ 2.7 N/mm2
Storage during 7 days

Consistency                                          pasty, highly viscous

Tooling time                                          max. 8 min.

Curing through                                     after 24 h: ≥ 3.0 mm
                                                           after 48 h: ≥ 4.5 mm

Density                                                1.41± 0.05 g/cm3

Change of volume                                ≤ 8 %
(DIN EN ISO 10563)

Temperature resistance                       permanently to + 90°C, short time to + 200°C  (max. 10 min.)
Application temperature                      +5 °C to + 40 °C
Temperature of the substrate               +5 °C to + 40 °C

Shelf life                                             12 months from production date
Storage conditions                               cool and dry

All measurements were performed under normal conditions (+23°C and 50% relative humidity).